Tamiya 58385 BMW 3 Series

Chassis: TT01, 4WD Shaft Drive

Click picture for larger view.

WITH WORKING HEAD AND TAIL LIGHTS
BMW 320Si WTCC 2006 TT01 / Lit
Based on the limited edition production BMW 320si, the WTCC version of this 3-series sports sedan continues BMWs tradition of touring car racing. This high-performance machine is powered by a 275 horsepower 2 litre inline 4-cylinder engine and features a distinctive rear wing and oversized fenders for an aggressive look. Team Germany was among several teams that entered this machine in the 2006 WTCC season. The two drivers on the team, Jorg Muller and Dirk Muller (no relation), both had impressive results, with Jorg finishing 2nd in the overall rankings by the slim margin of one point and Dirk taking 6th place.

About the Model

	Lightweight and user-friendly TT-01 chassis.
	4WD shaft driven bathtub chassis with coil spring damped, 4-wheel independent double wishbone suspension and sealed front and rear differential gearbox.
	Includes electronic speed controller (TEU-101 BK), type 540 motor, and Expec R/C system.
	Includes LEDs for head and tail lights that turn on automatically when the car is switched on. Add the TLU-02 Light Control Unit (ITEM 53937) for greater control of light operations.
	Metal-plated light casings further enhance the realism of the LEDs.
	Body is not painted and includes markings for car No.42 driven by Jorg Muller.
	Wide variety of tune-up parts are separately available to customize your machine.

Optional Power, Speed and Ride Upgrade Pack!
	Upgrade the TT01 to go faster than many Nitro cars - without altering any electrics or motors! Unbelievable but true - fitting the Carson TT01 upgrade pack (full bearings set, oil shock upgrade, spur gear upgrade and custom pinion) to any TT01 will give a top speed comparable with many Nitro cars and an improvement in handling! Order: Carson TT01 Upgrade £46.99 (RRP is £57.99)

An optional Mr Bear ballrace set is available for this car - click here for details

Tamiya
58385
DEAL

Tamiya 58385 BMW TT01 kit, Acoms Radio, Overnight Charger, 7.2v Sport Battery

£159
In Stock

Tamiya
58385
KIT

Tamiya 58385 BMW TT01 kit only - supply your own radio, receiver, servos, battery and charger

£109
In Stock

Deal Options Below...

If you require a kit without a speed controller, please quote "RAW KIT - LESS £15"

Order: PJ6DP £5

Upgrade to an PJ6DP Charger? Charges in 2 hours instead of Overnight

Order: Go Large +£30

Go Large? Upgrade a DEAL to a "Go Large" Deal for just £30 more and get a 3 Amp Peak Charger (Mains & Cigar), 3000 Mah Battery (Long Run Time), FREE Paint (1 colour) and 8 AA Batteries FREE too! (Battery and Charger replace standard items)

Low UK delivery prices - Select No Rush for Economy Delivery, or Standard for Express Delivery!

Tamiya 58390 Subaru Impreza 2007

Chassis: TT01, 4WD Shaft Drive

Click picture for larger view.

NOW ALSO AVAILABLE AS "BRUSHLESS" EDITION - Brushless 12T Motor and ESC, Bearings and Alloy Prop in place of equivalent in the kit.

WITH WORKING HEAD AND TAIL LIGHTS
Subaru Impreza TT01 WRC 2007
Tamiya has had a long history of releasing R/C models of real-life World Rally Championship cars, and this year sees the announcement of the new Subaru Impreza WRC Monte Carlo 07 on our popular TT-01 chassis complete with eye-catching LED lights.

The latest iteration of Subarus Impreza WRC rally car is outwardly not too different than the 2006 model. The main improvements are underneath the hood, with improved suspension geometry, a new turbo/intercooler, better weight distribution, and new differential settings for greater traction. There is also a new front bumper design to go along with the new intercooler. All of these enhancements aim to make the Impreza WRC 2007 a more responsive race car, and drivers Chris Atkinson and Peter Solberg have already attained positive results with 4th and 6th place finished respectively at Round 1 Monte Carlo.

About the Model

	Lightweight and user-friendly TT-01 chassis for effortless assembly.
	4WD shaft driven bathtub chassis with coil spring damped, 4-wheel independent double wishbone suspension and sealed front and rear differential gearbox.
	Brand new toolings for the new 2007 body, including separately moulded parts for the side mirrors, unique rear wing, and light casings.
	Includes high-quality stickers for sponsor logos and eye-catching gold 10-spoke wheels.

Optional Power, Speed and Ride Upgrade Pack!
	Upgrade the TT01 to go faster than many Nitro cars - without altering any electrics or motors! Unbelievable but true - fitting the Carson TT01 upgrade pack (full bearings set, oil shock upgrade, spur gear upgrade and custom pinion) to any TT01 will give a top speed comparable with many Nitro cars and an improvement in handling! Order: Carson TT01 Upgrade £46.99 (RRP is £57.99)

An optional Mr Bear ballrace set is available for this car - click here for details

No Time to build? Limited Edition READY BUILT version available!

Tamiya
58390
DEAL

Tamiya 58390 Subaru TT01 kit, Acoms Radio, Overnight Charger, 7.2v Sport Battery

£155
In Stock

Tamiya
58390
KIT

Tamiya 58390 Subaru TT01 kit only - supply your own radio, receiver, servos, battery and charger

£105
In Stock

Tamiya
58390X
DEAL

Tamiya 58390X Subaru BRUSHLESS EDITION TT01 kit, Acoms Radio, Overnight Charger, 7.2v Sport Battery

£245
In Stock

Tamiya
58390X
KIT

Tamiya 58390X Subaru BRUSHLESS EDITION TT01 kit only - supply your own radio, receiver, servos, battery and charger

£195
In Stock

Deal Options Below...

If you require a kit without a speed controller, please quote "RAW KIT - LESS £15"

Order: PJ6DP £5

Upgrade to an PJ6DP Charger? Charges in 2 hours instead of Overnight

Order: Go Large +£30

Low UK delivery prices - Select No Rush for Economy Delivery, or Standard for Express Delivery!

Tamiya 58454 Honda S800 Racing M05

Chassis: M05 Front Drive

Click picture for larger view.

Honda originally was a manufacturer of motorcycles; however in the early 1960s, they began venturing into motorcar racing. The S360 and S500 were the first 4-wheeled vehicles produced by Honda, and in 1965, the top of the line S800 sports car made its debut. Honda offered the vehicle as a coupe or roadster. The vehicle featured a high revving engine that reached 70hp and the 710kg lightweight vehicle could reach speeds of up to 160kmh.

Specs & Features

1/10 R/C assembly kit of the Honda S800.

Polycarbonate body mounted on the M-05 chassis.

Monocoque frame features a layout that optimizes weight distribution and lowers the chassis' center of gravity.

The 3-piece tie-rod steering linkage offers sharp cornering performance.

Sticker sheet and type 540 motor included.

2-channel R/C system, battery pack, and charger are separately required.

Wide variety of Option Parts are separately available to further customize your machine:

	Item 54000 M-Chassis Aluminum Damper Set (4pcs.)
	Item 54177 M-05 Aluminum Front Upright (Blue)
	Item 54178 M-05 Aluminum Rear Upright (Blue)
	Item 54179 M-05 Ball Bearing Set
	Item 54180 Titanium Screw Set

ESC Included

Please note : Light cases do not have LED attachment positions.

Tamiya
58454
DEAL

Tamiya 58454 Honda S800 M05 kit, Acoms Radio, Overnight Charger, 7.2v Sport Battery

£159
In Stock

Tamiya
58454
KIT

Tamiya 58454 Honda S800 M05 kit only - supply your own radio, receiver, servo, battery and charger

£109
In Stock

Deal Options Below...

If you require a kit without a speed controller, please quote "RAW KIT - LESS £15"

Order: PJ6DP £5

Upgrade to an PJ6DP Charger? Charges in 2 hours instead of Overnight

Order: Go Large +£30

Low UK delivery prices - Select No Rush for Economy Delivery, or Standard for Express Delivery!

Tamiya 58388 Drifting Mazda RX7	Chassis: Revised TT01D, 4WD Shaft Drive
Click picture for larger view.	Amazing Value - over £100 of upgrades in the kit as standard! Popularized by such movies as Fast and the Furious: Tokyo Drift and the well-known animation series Initial D, the once amateur sport of drift racing now has a wide audience and professional race series. Following its release as an R/C assembly kit and R/C Expert Built models on the TT-01 chassis, Tamiya now brings you the Mazda RX-7 (FD3S) rotary-powered sports car on the drift-spec TT-01D chassis complete with LED lights to let you drift in style. Introducing the TT-01D Drift Spec Chassis Based on the user-friendly TT-01, this 4WD chassis features lightweight bathtub frame for low centre of gravity and optimum balance. Drift spec additions include drift tyres, special suspension tunings, full ball bearings, sports-tuned motor, aluminium motor heat sink, CVA mini shock dampers and short springs. Enter the exciting world of drift rallying with the TT-01D! Equipped with Drift tyres These specially designed tyres are made from a rubber-based compound and feature grip appropriate to drift rallying. tyres come pre-attached to wheels for easy use. What's Drift Rallying?　 Drifting is a new style of extreme racing in which the driver forces the rear tyres into a slide and moves the car sideways around the track maintaining high speed and control. Gaining in popularity around the world, Tamiya now lets you experience exciting drift action without burning up your real car’s tyres! This electric R/C assembly kit features full drift specs including drift tyres and special suspension settings. Notes from the Spannerman: This is a highly upgraded TT01 - on top of the standard chassis, Tamiya have added the oil shocks, sport tune motor, adjustable upper links, revised springs, drift wheels pack, alloy motor fins, lighting kit, and the ballrace pack. Just add up how much it'd cost to buy the upgrades for a standard TT01 to convert to this spec and you'll see why this is such FANTASTIC VALUE!
	Tamiya 58388 DEAL	Tamiya 58388 Drift RX7 TT01 kit, Acoms Radio, Overnight Charger, 7.2v Sport Battery	£158 In Stock
	Tamiya 58388 KIT	Tamiya 58388 Drift RX7 TT01 kit only - supply your own radio, receiver, servo, battery and charger	£108 In Stock
Deal Options Below...	If you require a kit without a speed controller, please quote "RAW KIT - LESS £15"
Order: PJ6DP £5	Upgrade to an PJ6DP Charger? Charges in 2 hours instead of Overnight
Order: Go Large +£30	Go Large? Upgrade a DEAL to a "Go Large" Deal for just £30 more and get a 3 Amp Peak Charger (Mains & Cigar), 3000 Mah Battery (Long Run Time), FREE Paint (1 colour) and 8 AA Batteries FREE too! (Battery and Charger replace standard items)
Low UK delivery prices - Select No Rush for Economy Delivery, or Standard for Express Delivery!

Tamiya 58453 Alfa Romeo MiTo M05

Chassis: M05, 2WD Front Drive

Click picture for larger view.

The Alfa Romeo MiTo is a three-door super mini that was released in Milan on June 19th, 2008. The car was designed to compete with the Mini Cooper and upcoming Audi A1 vehicles. The car was named after MiTo after the location where it was designed, Milan, and the location where it was manufactured, Torino. The MiTo was designed on the popular European Fiat chassis. The vehicle features a new "Alfa DNA" system, which allows drivers to change the car setting depending on the driving conditions. The three settings offered with the new "Alfa DNA system" are Dynamc, Normal and All-Weather.

Specs & Features

	1/10 R/C assembly kit.
	The MiTo body is mounted on the M-05 chassis.
	The long 239mm wheelbase is adjustable.
	The servo, receiver, and ESC are mounted on the rear of the monocoque frame for better weight distribution and a lower center of gravity.
	The 3-piece tie-rod steering linkage offers sharp cornering performance.
	Includes 60D radial tires and newly developed 5-spoke wheels.
	Type 540 motor is included.
	TEU-104BK ESC included.
	2-channel R/C system, battery pack & charger are separately required.

An optional Mr Bear ballrace set is available for this car - click here for details

Tamiya
58453
DEAL

Tamiya 58453 Alfa MiTo M05 kit, Acoms Radio, Overnight Charger, 7.2v Sport Battery

£167
In Stock

Tamiya
58453
KIT

Tamiya 58453 Alfa MiTo M05 kit only - supply your own radio, receiver, servos, battery and charger

£117
In Stock

Deal Options Below...

If you require a kit without a speed controller, please quote "RAW KIT - LESS £15"

Order: PJ6DP £5

Upgrade to an PJ6DP Charger? Charges in 2 hours instead of Overnight

Order: Go Large +£30

Low UK delivery prices - Select No Rush for Economy Delivery, or Standard for Express Delivery!

Tamiya 58427 Fiat 500	Chassis: M03M, 2WD Front Drive
Click picture for larger view.	1957 saw Italian car manufacturers Fiat release the first Nuova 500 which went on to be a very popular little car. 50 years later in 2007, Fiat has enjoyed amazing success with their modern interpretation of the vehicle, the Fiat 500. The Fiat 500 was enthusiastically received by the consumer market not only in Italy but worldwide with the first production lot selling out within 3 weeks. About the Model The Fiat 500's body is accurately reproduced with a vacuum formed polycarbonate shell. New parts for side mirrors and wheels. Type 540 motor is installed on the excellent M-03M Chassis. Front mounted motor; 2WD front wheel drive. Tread pattern rubber tires with inner sponge included. 4-wheel independent double-wishbone suspension with friction dampers provides excellent handling. ESC (TEU-101BK) included. Battery pack & charger and 2-channel R/C system separately required. A wide range of Grade-Up parts are available for further customizing your machine. An optional Mr Bear ballrace set is available for this car - click here for details
	Tamiya 58427 DEAL	Tamiya 58427 Fiat 500 M03M kit, Acoms Radio, Overnight Charger, 7.2v Sport Battery	Was £169 Now £149 In Stock
	Tamiya 58427 KIT	Tamiya 58427 Fiat 500 M03M kit only - supply your own radio, receiver, servos, battery and charger	Was £119 Now £99 In Stock
Deal Options Below...	If you require a kit without a speed controller, please quote "RAW KIT - LESS £15"
Order: PJ6DP £5	Upgrade to an PJ6DP Charger? Charges in 2 hours instead of Overnight
Order: Go Large +£30	Go Large? Upgrade a DEAL to a "Go Large" Deal for just £30 more and get a 3 Amp Peak Charger (Mains & Cigar), 3000 Mah Battery (Long Run Time), FREE Paint (1 colour) and 8 AA Batteries FREE too! (Battery and Charger replace standard items)
Low UK delivery prices - Select No Rush for Economy Delivery, or Standard for Express Delivery!

Tamiya 58438 Mini Cooper Racing M05	Chassis: M05, 2WD Front Drive
Click picture for larger view.	After 10 years since the release of the first M-series R/C car, Tamiya is now releasing the latest M-05 chassis with the popular Rover Mini Cooper racing version body. This is a 1/10 R/C assembly kit. - Length: 315mm, Width: 167mm, Height: 135mm. - The very popular Mini Cooper Racing car comes loaded on the new M-05 chassis. - The servo, receiver, and ESC are mounted on the rear of the newly designed monocoque frame for better weight distribution and a lower center of gravity. - The 3-piece tie-rod steering linkage offers sharp cornering performance. - Sticker sheet included. - Includes 60D radial tires and silver Rover Mini Cooper wheels. - ESC and type 540 motor included. - 2-channel R/C system, battery pack & charger are separately required. - A wide variety of Option Parts for M-05 chassis machines and bodies are already available for further customization. An optional Mr Bear ballrace set is available for this car - click here for details
	Tamiya 58438 DEAL	Tamiya 58438 Mini Cooper M05 kit, Acoms Radio, Overnight Charger, 7.2v Sport Battery	£172 In Stock
	Tamiya 58438 KIT	Tamiya 58438 Mini Cooper M05 kit only - supply your own radio, receiver, servos, battery and charger	£122 In Stock
Deal Options Below...	If you require a kit without a speed controller, please quote "RAW KIT - LESS £15"
Order: PJ6DP £5	Upgrade to an PJ6DP Charger? Charges in 2 hours instead of Overnight
Order: Go Large +£30	Go Large? Upgrade a DEAL to a "Go Large" Deal for just £30 more and get a 3 Amp Peak Charger (Mains & Cigar), 3000 Mah Battery (Long Run Time), FREE Paint (1 colour) and 8 AA Batteries FREE too! (Battery and Charger replace standard items)
Low UK delivery prices - Select No Rush for Economy Delivery, or Standard for Express Delivery!

Tamiya 58407 Porsche 911 GT3

Chassis: TT01-E, 4WD Shaft Drive

Click picture for larger view.

WITH WORKING HEAD AND TAIL LIGHTS
The TT-01E is a new chassis derived from the original TT-01; upgraded with some redesigned parts for structural rigidity and maintenance ease. The shock towers are now molded separately from the gear case covers. There is a new upper deck design along with a new TA-05 inspired steering system that reduces slop.

About the Model

	Newly evolved TT-01 type E chassis features brand new A Parts and D Parts.
	A Parts (Uprights) are made of a polycarbonate plastic material.
	D Parts (Upper deck, motor cover, etc.) are made of a fiberglass-reinforced nylon material.
	Improved steering linkage design features a TA05 inspired steering system for sharper steering response.
	Completely new upper deck enhances chassis rigidity and mimics Tamiya's high-level race- spec machines.
	Upper deck also features a convenient transponder mount to further encourage fans to go to their local track and experience R/C racing.
	4WD shaft-driven bathtub chassis with coil spring damped, 4-wheel independent double wishbone suspension and sealed front and rear gearboxes.
	Porsche GT3 911 Cup body is accurately reproduced with lightweight polycarbonate.
	Includes ESC (TEU-101BK), Type 540 motor, and LEDs for headlights and tail lights.
	2-channel transmitter, 7.2V running battery & charger separately required.
	Wide variety of Option Parts are separately available to customize your machine.

Optional Power, Speed and Ride Upgrade Pack!
	Upgrade the TT01 to go faster than many Nitro cars - without altering any electrics or motors! Unbelievable but true - fitting the Carson TT01 upgrade pack (full bearings set, oil shock upgrade, spur gear upgrade and custom pinion) to any TT01 will give a top speed comparable with many Nitro cars and an improvement in handling! Order: Carson TT01 Upgrade £46.99 (RRP is £57.99)

An optional Mr Bear ballrace set is available for this car - click here for details

Tamiya
58407
DEAL

Tamiya 58407 Porsche GT3 TT01-E kit, Acoms Radio, Overnight Charger, 7.2v Sport Battery

Was £175
Now £160
In Stock

Tamiya
58407
KIT

Tamiya 58407 Porsche GT3 TT01-E kit only - supply your own radio, receiver, servos, battery and charger

Was £125
Now £110
In Stock

Deal Options Below...

If you require a kit without a speed controller, please quote "RAW KIT - LESS £15"

Order: PJ6DP £5

Upgrade to an PJ6DP Charger? Charges in 2 hours instead of Overnight

Order: Go Large +£30

Low UK delivery prices - Select No Rush for Economy Delivery, or Standard for Express Delivery!

Tamiya 58410 VW Golf

Chassis: TT01-E, 4WD Shaft Drive

Click picture for larger view.

WITH WORKING HEAD AND TAIL LIGHTS

The Golf GTI Cup is a one-make race series organized by Volkswagen Group Japan. The races feature Golf GTI cars which have been modified and outfitted for track use. These modifications include 4-point seatbelts, roll cage, and DSG (Direct Shift Gearbox). Owners also apply colorful liveries to set their car apart from the others. The series has 5 races throughout Japan, and encourages both seasoned racers and amateurs to go out and participate.

About the Model

Newly evolved TT-01 type E chassis features brand new A Parts and D Parts.

Damper Stay and Gear Case parts are made from fiberglass-reinforced resin for greater strength. These parts are now also separately molded to enable easier maintenance.

New front and rear uprights are also made from durable fiberglass-reinforced resin.

Improved steering linkage design features TA05 steering posts for sharper steering response.

Completely new upper deck enhances chassis rigidity and mimics Tamiya's high-level racespec machines.

Upper deck also features a convenient transponder mount to further encourage fans to go to their local track and experience R/C racing.

New-mold Golf GTI body made from lightweight polycarbonate material.

Stylish silver 10-spoke wheels and sticker set to replicate actual car's markings included.

Includes ESC (TEU-101BK), Type 540 motor, and LEDs to install in the metal-plated front and rear light cases.

ESC, 2-channel R/C system, 7.2V battery and charger separately required.

Wide variety of Option Parts are separately available to customize your machine.

Optional Power, Speed and Ride Upgrade Pack!
	Upgrade the TT01 to go faster than many Nitro cars - without altering any electrics or motors! Unbelievable but true - fitting the Carson TT01 upgrade pack (full bearings set, oil shock upgrade, spur gear upgrade and custom pinion) to any TT01 will give a top speed comparable with many Nitro cars and an improvement in handling! Order: Carson TT01 Upgrade £46.99 (RRP is £57.99)

An optional Mr Bear ballrace set is available for this car - click here for details

Tamiya
58410
DEAL

Tamiya 58410 VW Golf TT01-E kit, Acoms Radio, Overnight Charger, 7.2v Sport Battery

Was £175
Now £160
In Stock

Tamiya
58410
KIT

Tamiya 58410 VW Golf TT01-E kit only - supply your own radio, receiver, servos, battery and charger

Was £125
Now £110
In Stock

Deal Options Below...

If you require a kit without a speed controller, please quote "RAW KIT - LESS £15"

Order: PJ6DP £5

Upgrade to an PJ6DP Charger? Charges in 2 hours instead of Overnight

Order: Go Large +£30

Low UK delivery prices - Select No Rush for Economy Delivery, or Standard for Express Delivery!

Tamiya 58422 Porsche 911 Team KTR

Chassis: TT01-E, 4WD Shaft Drive

Click picture for larger view.

WITH WORKING HEAD AND TAIL LIGHTS
The Porsche Carrera Cup features race championships held in 8 countries and regions around the world. Team KTR was one of the entrants in the 2008 Carrera Cup Japan, and this ready to assemble electric powered R/C model depicts their Porsche 911 GT3 Cup Car, which was driven by Wataru Kobayakawa.

About the Model

	This is a 1/10 R/C assembly model of the Porsche 911 GT3 KTR.
	Length: 465mm, Width: 195mm, Height: 134mm, Chassis weight: 1,110g.
	The polycarbonate body beautifully captures the Porsche's world famous form.
	The improved steering linkage design features TA05 steering posts for sharper steering response.
	Shaft driven 4-wheel drive TT-01 Type E chassis gives this electric R/C car superior control and handling.
	Equipped with LED Light Unit TLU-01. *It is possible to assemble with LED Light Control Unit TLU-02 (sold separately).
	2 white and 2 red 5mm LED lights (Total 4) are included.
	Both front and rear light cases have two 5mm and four 3mm LED Light installation points.
	Includes ESC (TEU-101BK), Type 540 motor.
	2-channel R/C system, battery pack and charger separately required.
	Wide variety of Option Parts are separately available to customize your machine.

Optional Power, Speed and Ride Upgrade Pack!
	Upgrade the TT01 to go faster than many Nitro cars - without altering any electrics or motors! Unbelievable but true - fitting the Carson TT01 upgrade pack (full bearings set, oil shock upgrade, spur gear upgrade and custom pinion) to any TT01 will give a top speed comparable with many Nitro cars and an improvement in handling! Order: Carson TT01 Upgrade £46.99 (RRP is £57.99)

An optional Mr Bear ballrace set is available for this car - click here for details

Tamiya
58422
DEAL

Tamiya 58422 Porsche 911 Team KTR TT01-E kit, Acoms Radio, Overnight Charger, 7.2v Sport Battery

£178
In Stock

Tamiya
58422
KIT

Tamiya 58422 Porsche 911 Team KTR TT01-E kit only - supply your own radio, receiver, servos, battery and charger

£128
In Stock

Deal Options Below...

If you require a kit without a speed controller, please quote "RAW KIT - LESS £15"

Order: PJ6DP £5

Upgrade to an PJ6DP Charger? Charges in 2 hours instead of Overnight

Order: Go Large +£30

Low UK delivery prices - Select No Rush for Economy Delivery, or Standard for Express Delivery!

Tamiya 58411 Nissan GT-R

Chassis: TT01-E, 4WD Shaft Drive

Click picture for larger view.

WITH WORKING HEAD AND TAIL LIGHTS

After starting life as a concept car in 2001 and moving to the prototype stage in 2005, the world was treated to the debut of the Nissan GT-R at the 2007 Tokyo Motor Show. Powered by a 3,799cc twin turbo DOHC V6 engine producing 480hp, this new GT-R has become the fastest production car to lap Germany's famous Nurburgring. Yet this high-performance super car is also comfortable for everyday driving situations and meets tougher environmental regulations as well in order to live up to Nissan's label of "multi-performance" super car.

About the Model

Newly evolved TT-01 type E chassis features brand new A Parts and D Parts.

Damper Stay and Gear Case parts are made from fiberglass-reinforced resin for greater strength. These parts are now also separately molded to enable easier maintenance.

New front and rear uprights are also made from durable fiberglass-reinforced resin.

Improved steering linkage design features TA05 steering posts for sharper steering response.

Completely new upper deck enhances chassis rigidity and mimics Tamiya's high-level racespec machines.

Upper deck also features a convenient transponder mount to further encourage fans to go to their local track and experience R/C racing.

New-mold GT-R body made from lightweight polycarbonate material.

Injection-molded side mirrors and rear wing provide crisp detail. New wheels feature +2 offset.

Includes ESC (TEU-101BK), Type 540 motor, and LEDs to install in the metal-plated front and rear light cases.

ESC, 2-channel R/C system, 7.2V battery and charger separately required.

Wide variety of Option Parts are separately available to customize your machine.

Optional Power, Speed and Ride Upgrade Pack!
	Upgrade the TT01 to go faster than many Nitro cars - without altering any electrics or motors! Unbelievable but true - fitting the Carson TT01 upgrade pack (full bearings set, oil shock upgrade, spur gear upgrade and custom pinion) to any TT01 will give a top speed comparable with many Nitro cars and an improvement in handling! Order: Carson TT01 Upgrade £46.99 (RRP is £57.99)

An optional Mr Bear ballrace set is available for this car - click here for details.

Tamiya
58411
DEAL

Tamiya 58411 Nissan GTR WRC TT01-E kit, Acoms Radio, Overnight Charger, 7.2v Sport Battery

Was £175
Now £160
In Stock

Tamiya
58411
KIT

Tamiya 58411 Nissan GTR TT01-E kit only - supply your own radio, receiver, servos, battery and charger

Was £125
Now £110
In Stock

Deal Options Below...

If you require a kit without a speed controller, please quote "RAW KIT - LESS £15"

Order: PJ6DP £5

Upgrade to an PJ6DP Charger? Charges in 2 hours instead of Overnight

Order: Go Large +£30

Low UK delivery prices - Select No Rush for Economy Delivery, or Standard for Express Delivery!

Tamiya 58444 Abarth 500 Assetto Corse M05	Chassis: M05, 2WD Front Drive
Click picture for larger view.	The Abarth 500 Assetto Corse is the 2nd body variation released on the M-05 chassis. Based on the popular Fiat 500, the Abarth features a turbo charged engine with 197hp, lightweight aluminium wheels, racing mirrors and a spoiler. The RC version is a front wheel drive easy to assemble kit that is also easy to drive. Specs & Features 1/10 R/C assembly kit of the Abarth 500 Assetto Corse. Length: 365mm Width: 170mm Height: 142mm Wheelbase: 225mm (Middle wheelbase). The sporty form of the Abarth 500 comes precisely reproduced with a polycarbonate body and is loaded on the new M-05 chassis. Side mirrors and rear wing included. Polycarbonate light case parts allow installation of separately available LED lights. The servo, receiver, and ESC are mounted on the rear of the newly designed monocoque frame for better weight distribution and a lower center of gravity. The 3-piece tie-rod steering linkage offers sharp cornering performance. Sticker sheet with chrome-effect stickers included. TEU-104BK ESC and type 540 motor included. 2-channel R/C system, battery pack & charger are separately required. A Video of this car can be seen on our Shopping Basket site. An optional Mr Bear ballrace set is available for this car - click here for details
	Tamiya 58444 DEAL	Tamiya 58444 Abarth 500 Assetto Corse M05 kit, Acoms Radio, Overnight Charger, 7.2v Sport Battery	£184 In Stock
	Tamiya 58444 KIT	Tamiya 58444 Abarth 500 Assetto Corse M05 kit only - supply your own radio, receiver, servos, battery and charger	£134 In Stock
Deal Options Below...	If you require a kit without a speed controller, please quote "RAW KIT - LESS £15"
Order: PJ6DP £5	Upgrade to an PJ6DP Charger? Charges in 2 hours instead of Overnight
Order: Go Large +£30	Go Large? Upgrade a DEAL to a "Go Large" Deal for just £30 more and get a 3 Amp Peak Charger (Mains & Cigar), 3000 Mah Battery (Long Run Time), FREE Paint (1 colour) and 8 AA Batteries FREE too! (Battery and Charger replace standard items)
Low UK delivery prices - Select No Rush for Economy Delivery, or Standard for Express Delivery!

Tamiya 58437 Mitsubishi Lancer EVO X

Chassis: TT01-E, 4WD Shaft Drive

Click picture for larger view.

WITH WORKING HEAD AND TAIL LIGHTS

The TT-01E is a new chassis derived from the original TT-01; upgraded with some redesigned parts for structural rigidity and maintenance ease. The shock towers are now molded separately from the gear case covers. There is a new upper deck design along with a new TA-05 inspired steering system that reduces slop.

After a full model change, the Mitsubishi Lancer Evolution X was unveiled to the world in 2007. As well as being Mitsubishi's flagship model, the visually impressive Evo. X featured many new outstanding technological aspects which attracted much attention. The newly developed 2 litre 4 cylinder DOHC aluminium block turbo-charged engine provides great weight savings and thumps out 280ps and 43kg/m of torque. Also a first for Japanese cars, the Evo. X features a Twin Clutch SST automated manual transmission which allows a smooth and swift gear change, making driving more enjoyable. The sporty body also features a distinctive front end and a large rear wing

This is a 1/10 scale R/C assembly model kit of the Mitsubishi Lancer Evolution X.

The polycarbonate body accurately captures the impressive form of the Evo. X.

Side mirrors, rear wing, and metal plated light cases are precisely reproduced.

Shaft driven 4-wheel drive TT-01 Type-E chassis gives this electric R/C car superior control and handling.

Silver 10-spoke wheels and tires with tread pattern are included.

2 white and 2 red 5mm LED lights (Total 4) are included.

The front light case has four 5mm and two 3mm LED Light installation points with the rear having four 5mm and four 3mm installation points.

Comes with LED Light Unit TLU-01 (Item 53909). *It is possible to assemble with the separately available LED Light Control Unit TLU-02 (Item 53937) which allows up to 16pairs of LEDs (total 32 LEDs) to be controlled.

ESC and type 540 motor included.

2-channel R/C system, battery pack & charger are separately required.

A wide variety of Option Parts are available for you to further customize your machine.


Optional Power, Speed and Ride Upgrade Pack!
	Upgrade the TT01 to go faster than many Nitro cars - without altering any electrics or motors! Unbelievable but true - fitting the Carson TT01 upgrade pack (full bearings set, oil shock upgrade, spur gear upgrade and custom pinion) to any TT01 will give a top speed comparable with many Nitro cars and an improvement in handling! Order: Carson TT01 Upgrade £46.99 (RRP is £57.99)

An optional Mr Bear ballrace set is available for this car - click here for details

Tamiya
58437
DEAL

Tamiya 58437 Mitsubishi Lancer TT01-E kit, Acoms Radio, Overnight Charger, 7.2v Sport Battery

£194
In Stock

Tamiya
58437
KIT

Tamiya 58437 Mitsubishi Lancer TT01-E kit only - supply your own radio, receiver, servos, battery and charger

£144
In Stock

Deal Options Below...

If you require a kit without a speed controller, please quote "RAW KIT - LESS £15"

Order: PJ6DP £5

Upgrade to an PJ6DP Charger? Charges in 2 hours instead of Overnight

Order: Go Large +£30

Low UK delivery prices - Select No Rush for Economy Delivery, or Standard for Express Delivery!

Tamiya 58439 Cusco Dunlop Subaru Impreza	Chassis: TT01-E, 4WD Shaft Drive
Click picture for larger view.	WITH WORKING HEAD AND TAIL LIGHTS This 2008 Super GT300 entrant, the Cusco Dunlop Subaru Impreza comes on the fun to drive TT-01 Type-E chassis. Finishing the Super GT300 season in 6th from a field of 28entrants, the Impreza showed its prowess at the 4th Round in Sepang where it started from pole position and went on to claim the win. The Impreza also went on to record two more pole positions in the wet at Round 6 in Suzuka and at Round 9 in Fuji. The Impreza is powered by a Horizontally Opposed DOHC turbo charged 4-cylinder engine and is the only AWD race car in Super GT. This is a 1/10 scale R/C assembly model kit of the Cusco Dunlop Subaru Impreza. The polycarbonate body accurately captures the impressive form of the Impreza. Side mirrors, rear wing, and metal plated light cases are precisely reproduced. Shaft driven 4-wheel drive TT-01 Type-E chassis gives this electric R/C car superior control and handling. Accurately reproduced wheels and tires with tread pattern are included. 2 white and 2 red 5mm LED lights (Total 4) are included. The front light case has four 5mm and two 3mm LED Light installation points with the rear having four 5mm and four 3mm installation points. Comes with LED Light Unit TLU-01 (Item 53909). It is possible to assemble with the separately available LED Light Control Unit TLU-02 (Item 53937) which allows up to 16pairs of LEDs (total 32 LEDs) to be controlled. ESC and type 540 motor included. 2-channel R/C system, battery pack & charger are separately required. A wide variety of Option Parts are available for you to further customize your machine. Optional Power, Speed and Ride Upgrade Pack!* Upgrade the TT01 to go faster than many Nitro cars - without altering any electrics or motors! Unbelievable but true - fitting the Carson TT01 upgrade pack (full bearings set, oil shock upgrade, spur gear upgrade and custom pinion) to any TT01 will give a top speed comparable with many Nitro cars and an improvement in handling! Order: Carson TT01 Upgrade £46.99 (RRP is £57.99) An optional Mr Bear ballrace set is available for this car - click here for details
	Tamiya 58439 DEAL	Tamiya 58439 Subaru Cusco TT01-E kit, Acoms Radio, Overnight Charger, 7.2v Sport Battery	£205 In Stock
	Tamiya 58439 KIT	Tamiya 58439 Subaru Cusco TT01-E kit only - supply your own radio, receiver, servos, battery and charger	£155 In Stock
Deal Options Below...	If you require a kit without a speed controller, please quote "RAW KIT - LESS £15"
Order: PJ6DP £5	Upgrade to an PJ6DP Charger? Charges in 2 hours instead of Overnight
Order: Go Large +£30	Go Large? Upgrade a DEAL to a "Go Large" Deal for just £30 more and get a 3 Amp Peak Charger (Mains & Cigar), 3000 Mah Battery (Long Run Time), FREE Paint (1 colour) and 8 AA Batteries FREE too! (Battery and Charger replace standard items)
Low UK delivery prices - Select No Rush for Economy Delivery, or Standard for Express Delivery!

Tamiya 58426 Subaru Impreza 2008

Chassis: TT01-E, 4WD Shaft Drive

Click picture for larger view.

WITH WORKING HEAD AND TAIL LIGHTS

The TT-01E is a new chassis derived from the original TT-01; upgraded with some redesigned parts for structural rigidity and maintenance ease. The shock towers are now molded separately from the gear case covers. There is a new upper deck design along with a new TA-05 inspired steering system that reduces slop.

At the 7th Round of the 2008 World Rally Championship "the Acropolis Rally of Greece", the world has seen the Subaru WRC team unleash their new exciting 2008 Impreza. With team driver Petter Solberg at the helm, the Impreza went on to win 2nd place on debut. The Impreza has also gone on to win a 3rd place podium finish at the Round 9 "Neste Oil Rally Finland".

About the Model

This is a 1/10 assembly R/C model of the 2008 WRC Subaru Impreza racing car.

Length: 434mm, Width: 188mm, Height: 141mm.

Polycarbonate body captures the aggressive form of the Impreza.

The improved steering linkage design features TA05 steering posts for sharper steering response.

Shaft driven 4-wheel drive TT-01 Type E chassis gives this electric R/C car superior control and handling.

Equipped with LED Light Unit TLU-01. *It is possible to assemble with LED Light Control Unit TLU-02 (sold separately).

2 white and 2 red 5mm LED lights (Total 4) are included.

Both front and rear light cases have two 5mm and four 3mm LED Light installation points.

Includes ESC (TEU-101BK) and Type 540 motor.

2-channel R/C system, battery pack and charger separately required.

Wide variety of Option Parts are separately available to customize your machine.


Optional Power, Speed and Ride Upgrade Pack!
	Upgrade the TT01 to go faster than many Nitro cars - without altering any electrics or motors! Unbelievable but true - fitting the Carson TT01 upgrade pack (full bearings set, oil shock upgrade, spur gear upgrade and custom pinion) to any TT01 will give a top speed comparable with many Nitro cars and an improvement in handling! Order: Carson TT01 Upgrade £46.99 (RRP is £57.99)

An optional Mr Bear ballrace set is available for this car - click here for details

Tamiya
58426
DEAL

Tamiya 58426 Subaru 2008 TT01-E kit, Acoms Radio, Overnight Charger, 7.2v Sport Battery

£205
In Stock

Tamiya
58426
KIT

Tamiya 58426 Subaru 2008 TT01-E kit only - supply your own radio, receiver, servos, battery and charger

£155
In Stock

Deal Options Below...

If you require a kit without a speed controller, please quote "RAW KIT - LESS £15"

Order: PJ6DP £5

Upgrade to an PJ6DP Charger? Charges in 2 hours instead of Overnight

Order: Go Large +£30

Low UK delivery prices - Select No Rush for Economy Delivery, or Standard for Express Delivery!

Tamiya 58433 Mercedes C Class DTM 08 Tiele

Chassis: TT01-E, 4WD Shaft Drive

Click picture for larger view.

WITH WORKING HEAD AND TAIL LIGHTS

The TT-01E is a new chassis derived from the original TT-01; upgraded with some redesigned parts for structural rigidity and maintenance ease. The shock towers are now moulded separately from the gear case covers. There is a new upper deck design along with a new TA-05 inspired steering system that reduces slop.

Featuring throughout the 2008 DTM (German Touring Car Masters) season was the impressive No.6 Mercedes C Class entrant with famed driver Bernd Schneider at the helm.The car proved to be a highly competitive machine and went on to win first place at Round 7 Nurburgring in Germany and third place at Round 9 Circuit de Catalunya in Spain.

This is a 1/10 scale R/C assembly model kit of the 2008 Mercedes Benz AMG DTM C Class.

The polycarbonate body accurately captures the impressive form of the car.

Shaft driven 4-wheel drive TT-01 Type-E chassis gives this electric R/C car superior control and handling.

Comes with racing slick tires.

2 white and 2 red 5mm LED lights (Total 4) are included.

ESC and type 540 motor included.

2-channel R/C system, battery pack & charger are separately required.

A wide variety of Option Parts are available for you to further customize your machine.


Optional Power, Speed and Ride Upgrade Pack!
	Upgrade the TT01 to go faster than many Nitro cars - without altering any electrics or motors! Unbelievable but true - fitting the Carson TT01 upgrade pack (full bearings set, oil shock upgrade, spur gear upgrade and custom pinion) to any TT01 will give a top speed comparable with many Nitro cars and an improvement in handling! Order: Carson TT01 Upgrade £46.99 (RRP is £57.99)

An optional Mr Bear ballrace set is available for this car - click here for details

Tamiya
58433
DEAL

Tamiya 58433 Mercedes C Class DTM 08 TT01-E kit, Acoms Radio, Overnight Charger, 7.2v Sport Battery

£205
In Stock

Tamiya
58433
KIT

Tamiya 58433 Mercedes C Class DTM 08 TT01-E kit only - supply your own radio, receiver, servos, battery and charger

£155
In Stock

Deal Options Below...

If you require a kit without a speed controller, please quote "RAW KIT - LESS £15"

Order: PJ6DP £5

Upgrade to an PJ6DP Charger? Charges in 2 hours instead of Overnight

Order: Go Large +£30

Low UK delivery prices - Select No Rush for Economy Delivery, or Standard for Express Delivery!

Tamiya 58458 Gallardo Supertrofeo TT01E

Chassis: TT01-E, 4WD Shaft Drive

Click picture for larger view.

The TT-01E is a new chassis derived from the original TT-01; upgraded with some redesigned parts for structural rigidity and maintenance ease. The shock towers are now moulded separately from the gear case covers. There is a new upper deck design along with a new TA-05 inspired steering system that reduces slop.

Released in May 2009, the Lamborghini Super Trofeo Gallardo is a lightweight version of the Gallardo LP 560-4. The car features a reworked suspension, Pirelli tires, safety cage, and racing brake system.

Specs & Features

	1/10 scale R/C assembly model kit of the Lamborghini Gallardo Super Trofeo.
	Length: 450mm, Width: 204mm, Tread: 190mm
	Highly detailed polycarbonate body.
	Side mirrors, rear wing, and front and rear light cases are precisely reproduced in ABS.
	Shaft driven 4-wheel drive TT-01 Type-E chassis gives this electric R/C car superior control and handling.
	Accurately reproduced wheels and slick tyres are included.


Optional Power, Speed and Ride Upgrade Pack!
	Upgrade the TT01 to go faster than many Nitro cars - without altering any electrics or motors! Unbelievable but true - fitting the Carson TT01 upgrade pack (full bearings set, oil shock upgrade, spur gear upgrade and custom pinion) to any TT01 will give a top speed comparable with many Nitro cars and an improvement in handling! Order: Carson TT01 Upgrade £46.99 (RRP is £57.99)

An optional Mr Bear ballrace set is available for this car - click here for details

Tamiya
58458
DEAL

Tamiya 58458 Gallardo TT01-E kit, Acoms Radio, Overnight Charger, 7.2v Sport Battery

£207
In Stock

Tamiya
58458
KIT

Tamiya 58458 Gallardo TT01-E kit only - supply your own radio, receiver, servos, battery and charger

£157
In Stock

Deal Options Below...

If you require a kit without a speed controller, please quote "RAW KIT - LESS £15"

Order: PJ6DP £5

Upgrade to an PJ6DP Charger? Charges in 2 hours instead of Overnight

Order: Go Large +£30

Low UK delivery prices - Select No Rush for Economy Delivery, or Standard for Express Delivery!

Tamiya 58419 Nismo R34 GT-R Drift

Chassis: TT01-E, 4WD Shaft Drive

Click picture for larger view.

WITH WORKING HEAD AND TAIL LIGHTS

The world famous Nissan NISMO R34 GT-R Z-Tune now comes loaded on the impressive drift spec TT-01D chassis and is just waiting for you to drift it around the track.

	Based on the lightweight and user-friendly TT-01 chassis for effortless assembly.
	4WD shaft driven bathtub chassis with coil spring damped, 4-wheel independent double wishbone suspension and sealed front and rear differential gearbox.
	Drift-spec modifications include special suspension tuning, full ball bearings, sport-tuned motor, aluminum heat sink, CVA mini shock dampers and short springs and adjustable upper arms.
	Polycarbonate body captures the GT-R's beautiful shape including parts such as the front and rear fenders, wing, and the hood's air outlet.
	Super Driftech tires are made from resin and rubber compound specially designed for long-lasting drift action.
	Includes Electronic Speed Controller (TEU-101 BK) and RS-540 Sport Tuned Motor.
	Includes LED Light Unit (TLU-01) and 2 x white LED's (Front) and 2 x red LED's (Rear).
	Add separately available LED lights for a greater sense of realism.
	Add Tamiya LED Light Control Unit (TLU-02) Item 53937 for more control of light operations.
	Wide variety of tune-up parts are separately available to further customize your machine.
	2-channel R/C system, 7.2V battery and charger separately required.

Tamiya
58419
DEAL

Tamiya 58419 Nismo R34 Z-Tune Drift TT01D kit, Acoms Radio, Overnight Charger, 7.2v Sport Battery

£215
In Stock

Tamiya
58419
KIT

Tamiya 58419 Nismo R34 Z-Tune Drift TT01D kit only - supply your own radio, receiver, servos, battery and charger

£165
In Stock

Deal Options Below...

If you require a kit without a speed controller, please quote "RAW KIT - LESS £15"

Order: PJ6DP £5

Upgrade to an PJ6DP Charger? Charges in 2 hours instead of Overnight

Order: Go Large +£30

Low UK delivery prices - Select No Rush for Economy Delivery, or Standard for Express Delivery!

Tamiya 58449 BMW M3 GT2	Chassis: TT01E, 4WD Shaft Drive
Click picture for larger view.	WITH WORKING HEAD AND TAIL LIGHTS This vehicle is built on the TT-01 Type E chassis and is a R/C model of Rahal Letterman's BMW M3 GT2, which was raced at the 2009 American Le Mans Series. Specs & Features 1/10 scale R/C assembly model kit of the BMW M3 GT2 2009. Detailed polycarbonate body accurately captures the powerful form of the BMW M3 GT2. Side mirrors, rear wing, and metal plated light cases are precisely reproduced. Shaft driven 4-wheel drive TT-01 Type-E chassis. Accurately reproduced wheels and tires with tread pattern are included. Each front light case has one 5mm and one 3mm LED Light installation points. Each rear light case has one 5mm and two 3mm LED Light installation points. Comes with LED Light Unit TLU-01 (Item 53909) and 2 white and 2 red 5mm LED lights (Total 4) are included. It is possible to assemble with the separately available LED Light Control Unit TLU-02 (Item 53937) which allows up to 16 pairs of LEDs (total 32 LEDs) to be controlled. TEU-101BK ESC and type 540 motor included. 2-channel R/C system, battery pack & charger are separately required. A wide variety of Option Parts is available for you to further customize your machine:* Item 51000 Hi-Torque Servo Saver (Black) Item 53663 Ball Differential Set (TT-01, TGS) Item 53666 TT-01 Metal Motor Mount Item 54025 TT-01 TYPE-E Ball Bearing Set Item 54026 TT-01 Alu. Prop. Joint & Shaft
	Tamiya 58449 DEAL	Tamiya 58449 BMW M3 GT2 kit, Acoms Radio, Overnight Charger, 7.2v Sport Battery	£205 In Stock
	Tamiya 58449 KIT	Tamiya 58449 BMW M3 GT2 kit only - supply your own radio, receiver, servo, battery and charger	£155 In Stock
Deal Options Below...	If you require a kit without a speed controller, please quote "RAW KIT - LESS £15"
Order: PJ6DP £5	Upgrade to an PJ6DP Charger? Charges in 2 hours instead of Overnight
Order: Go Large +£30	Go Large? Upgrade a DEAL to a "Go Large" Deal for just £30 more and get a 3 Amp Peak Charger (Mains & Cigar), 3000 Mah Battery (Long Run Time), FREE Paint (1 colour) and 8 AA Batteries FREE too! (Battery and Charger replace standard items)
Low UK delivery prices - Select No Rush for Economy Delivery, or Standard for Express Delivery!

Tamiya 58442 BMW Z4 Hatsune Miku

Chassis: TT01E, 4WD Shaft Drive

Click picture for larger view.

WITH WORKING HEAD AND TAIL LIGHTS

Anime characters have become a popular trend worldwide and recently in sports. The Super GT300 Series, Team Studie GLAD Racing's BMW Z4 incorporated the anime trend into their paint scheme. The vehicle features the characters from a popular Vocaloid Series of Japanese Anime.

Specs & Features

	1/10 R/C assembly kit of the Hatsune Miku Studie GLAD BMW Z4.
	This model features the livery seen at the 2009 Super GT opening race at Okayama.
	Polycarbonate body of the BMW Z4.
	Includes side mirrors, rear wing, and metal-plated light cases.
	Shaft driven 4-wheel drive TT-01 Type-E chassis.
	Comes with slick tires snf BBS style mesh wheels.
	2 red and 2 yellow 5mm LEDs and LED Light Control Unit TLU-01 (Item 53909) included.
	TEU-101BK ESC and type 540 motor included.
	2-channel R/C system, battery pack & charger are separately required.
	Add the separately available LED Light Control Unit TLU-02 (Item 53937) to allow control of up to 16 pairs of LEDs (total 32 LEDs).
	A wide variety of Option Parts are available.
	For more information on Hatsune Miku, visit: http://en.wikipedia.org/wiki/Vocaloid or the official website for Hatsune Miku:http://www.crypton.co.jp/mp/pages/prod/vocaloid/cv01.jsp
	VIDEO of this car can be seen on our "Shopping" site, see link below:

Tamiya
58442
DEAL

Tamiya 58442 BMW Z4 Hatsune Miku kit, Acoms Radio, Overnight Charger, 7.2v Sport Battery

£212
In Stock

Tamiya
58442
KIT

Tamiya 58442 BMW Z4 Hatsune Miku kit only - supply your own radio, receiver, servo, battery and charger

£162
In Stock

Deal Options Below...

If you require a kit without a speed controller, please quote "RAW KIT - LESS £15"

Order: PJ6DP £5

Upgrade to an PJ6DP Charger? Charges in 2 hours instead of Overnight

Order: Go Large +£30

Low UK delivery prices - Select No Rush for Economy Delivery, or Standard for Express Delivery!

Tamiya 84111 Tyrrell P34 Six Wheeler - F103 1976 Japan	Chassis: Race Bred, Custom 6 Wheel F103 Based
Click picture for larger views.	*Collector edition: Spares will be available but only by special order with lead time of approx 6 weeks.* The Tyrrell P34 caused a sensation within the F1 world when it was unveiled in 1975. Derek Gardner sought to enhance braking and cornering performance by reducing the size of the drag-inducing front tires while preserving contact patch area through the use of 4 tires, thereby creating the only 6-wheeled machine in F1 history. It took part in actual races beginning with the Spanish GP in 1976, and drivers J. Scheckter and P. Depailler went on to drive their cars to a 1-2 finish at the Swedish GP to prove the incredible potential of the P34. At the final race of the season, the P34 appeared before Japanese fans at the inaugural Japanese GP held at Fuji Speedway. F1 race cars often have race-specific modifications, and the No.3 Tyrrell P34 driven by J. Scheckter at the Japanese GP was distinguished by a triangular net guard fitted on the air funnel and large wingtip panels on the rear wing. The race was a battle for the championship between Ferrari�s N. Lauda and McLaren's J. Hunt and drew a great deal of attention both within Japan and around the world. The weather was fair on Friday and Saturday, but conditions were worsened by rain on Sunday. Although the race finally began at 3PM after a long delay, championship contender N. Lauda quickly retired. The lost excitement was brought back by the performances of the Japanese drivers and P. Depailler's Tyrrell P34. From his 13th place qualifying position, Depailler overtook the field to briefly lead before a tire puncture dropped him back to finish the race in second place behind M. Andretti's Lotus. Specs & Features 1/10 scale R/C assembly kit of the history-making Tyrrell P34. The P34 is mounted on its own special chassis based on the F103 chassis. Rubber tires included. Type 540 motor included. The polycarbonate body accurately represents the P34 which featured an exposed engine bay. Polycarbonate rear wing with aluminum stays included. Sticker sheet depicting the 1976 Japanese GP included. 2-ch. R/C system, battery pack and charger are separately available. ESC is not included. This car requires a standard 6 cell battery pack, rather than the smaller pack included in an earlier release. Also needs standard ESC. IMPORTANT: This kit does not include a speed controller. You require an electronic speed controller to run this car - we include one in our deal below... More speed controllers can be found on our Speed Controllers page.
	Tamiya 84111 DEAL	Tamiya 84111 Tyrell kit, Acoms Radio, TEU101BK ESC, Overnight Charger, 7.2v Sport Battery	£229 In Stock
	Tamiya 84111 KIT	Tamiya 84111 Tyrell kit only - supply your own radio, ESC, receiver, servo, battery and charger	£164 In Stock
Deal Options Below...
Order: PJ6DP £5	Upgrade to an PJ6DP Charger? Charges in 2 hours instead of Overnight
Order: Go Large +£30	Go Large? Upgrade a DEAL to a "Go Large" Deal for just £30 more and get a 3 Amp Peak Charger (Mains & Cigar), 3000 Mah Battery (Long Run Time), FREE Paint (1 colour) and 8 AA Batteries FREE too! (Battery and Charger replace standard items)
Low UK delivery prices - Select No Rush for Economy Delivery, or Standard for Express Delivery!

Tamiya 58428 Skyline GT-R R32 Drift	Chassis: Revised TT01D, 4WD Shaft Drive
Click picture for larger view.	Amazing Value - over £100 of upgrades in the kit as standard! The world famous Skyline R32 GT-R now comes on the impressive drift spec TT-01D chassis and is waiting for you to test your drifting prowess. About the Model Based on the user-friendly TT-01D chassis for effortless assembly. 4WD shaft driven bathtub chassis with coil spring damped, 4-wheel independent double wishbone suspension and sealed front and rear differential gearboxes. Drift-spec modifications include special suspension tuning, full ball bearings, RS-540 sport tuned motor, aluminum heat sink, CVA super mini shock dampers and short springs and adjustable upper arms. Polycarbonate body captures the GT-R's beautiful shape including parts such as the front and rear fenders, wing, and the hood's air outlet. Installed on the stylish silver wheels are Super Driftech tires which are made from resin and rubber compound specially designed for long-lasting drift action. (24mm, offset +2) Includes Electronic Speed Controller (TEU-101 BK). Includes LED Light Unit (TLU-01) and 2 x white LEDs (Front) and 2 x red LEDs (Rear). Add extra separately available LED lights for a greater sense of realism. It is possible to install up to 14 LED Lights on this GT-R (5mm x 8, 3mm x 6) Add Tamiya LED Light Control Unit (TLU-02) Item 53937 for more control of light operations. Wide variety of tune-up parts are separately available to further customize your machine. 2-channel R/C system, battery pack and charger separately required. Notes from the Spannerman: This is a highly upgraded TT01 - on top of the standard chassis, Tamiya have added the oil shocks, sport tune motor, adjustable upper links, revised springs, drift wheels pack, alloy motor fins and the ballrace pack. Plus a full lighting kit. Just add up how much it'd cost to buy the upgrades for a standard TT01 to convert to this spec and you'll see why this is such FANTASTIC VALUE!
	Tamiya 58428 DEAL	Tamiya 58428 Skyline GT-R R32 Drift kit, Acoms Radio, Overnight Charger, 7.2v Sport Battery	£220 In Stock
	Tamiya 58428 KIT	Tamiya 58428 Skyline GT-R R32 Drift kit only - supply your own radio, receiver, servo, battery and charger	£170 In Stock
Deal Options Below...	If you require a kit without a speed controller, please quote "RAW KIT - LESS £15"
Order: PJ6DP £5	Upgrade to an PJ6DP Charger? Charges in 2 hours instead of Overnight
Order: Go Large +£30	Go Large? Upgrade a DEAL to a "Go Large" Deal for just £30 more and get a 3 Amp Peak Charger (Mains & Cigar), 3000 Mah Battery (Long Run Time), FREE Paint (1 colour) and 8 AA Batteries FREE too! (Battery and Charger replace standard items)
Low UK delivery prices - Select No Rush for Economy Delivery, or Standard for Express Delivery!

Tamiya 58432 Toyota Arristo	Chassis: TT01-E, 4WD Shaft Drive
Click picture for larger view.	WITH WORKING HEAD AND TAIL LIGHTS The top class sports sedan Toyota Aristo, otherwise known as the Toyota Lexus GS has attracted attention all around the world with its combination of stylish European looks and superb Japanese technology since it was first released in 1991. This R/C model comes on the new TT-01Type E Drift chassis which and is equipped with Tamiya LED light unit TLU- 01, headlights, and taillights which realistically replicates the Aristos lighting dynamics. About the Model Length: 460mm, Width: 187mm, Height: 140mm. Based on the lightweight and user-friendly TT-01E chassis for effortless assembly. 4WD shaft driven bathtub chassis with coil spring damped, 4-wheel independent double wishbone suspension and sealed front and rear differential gearbox. Drift-spec modifications include special suspension tuning, full ball bearings, RS-540 sport tuned motor, aluminum heat sink, CVA super mini shock dampers and short springs and adjustable upper arms. Polycarbonate body and newly designed font and rear light cases capture the Aristos beautiful form. Installed on the stylish wheels are Super Driftech tires which are specially designed for long-lasting drift action. (24mm, offset +2) Includes Electronic Speed Controller (TEU-101 BK). Includes LED Light Unit (TLU-01) and 2 x white LED's (Front) and 2 x red LED's (Rear). Add separately available LED lights for a greater sense of realism. Add Tamiya LED Light Control Unit (TLU-02) Item 53937 for more control of light operations. Wide variety of tune-up parts are separately available to further customize your machine. 2-channel R/C system, battery pack and charger separately required.
	Tamiya 58432 DEAL	Tamiya 58432 Toyota Aristo Drift TT01D kit, Acoms Radio, Overnight Charger, 7.2v Sport Battery	£210 In Stock
	Tamiya 58432 KIT	Tamiya 58432 Toyota Aristo Drift TT01D kit only - supply your own radio, receiver, servos, battery and charger	£160 In Stock
Deal Options Below...	If you require a kit without a speed controller, please quote "RAW KIT - LESS £15"
Order: PJ6DP £5	Upgrade to an PJ6DP Charger? Charges in 2 hours instead of Overnight
Order: Go Large +£30	Go Large? Upgrade a DEAL to a "Go Large" Deal for just £30 more and get a 3 Amp Peak Charger (Mains & Cigar), 3000 Mah Battery (Long Run Time), FREE Paint (1 colour) and 8 AA Batteries FREE too! (Battery and Charger replace standard items)
Low UK delivery prices - Select No Rush for Economy Delivery, or Standard for Express Delivery!

Tamiya 58447 Ferrari F60 F1 F104	Chassis: Race Bred, Tuneable F104
Click picture for larger views.	Tamiya has a new edition to the 1/10 scale R/C F104 Series line up, an Officially Licensed 2009 season Ferrari F60. In the 2009 F1 season, Ferrari released the new F60 vehicle to celebrate 60 years of competition. The new F1 Ferrari debuted at the Australian Grand Prix. The F60 started off the season slow, but has gone on to win first place at Round 4 and scored points in every race since. The F60 has taken three 3rd place finishes, one 2nd place finish and a 1st place win at the Belgian Grand Prix. After 12 races, Ferrari held the third position in the Constructors standings. Specs & Features This is an OFFICIALLY LICENSED 1/10 scale R/C assembly kit of the Ferrari F60 F-1 Car. The kit features 3-dimensional front and rear wings, rear diffuser, side mirrors, and aerofoil suspension arms for enhanced realism. New rubber tires and wheels enhance the scale realism of the F60. (4pcs.) Body can be assembled with or without the polycarbonate sloped side pontoons. Type-540 motor included. 2-channel R/C system, battery pack, ESC & charger are separately required. The F104 chassis features the same component layout as the F104 PRO and can be upgraded to F104 PRO standards with separately available Option Parts. The F60 features the following new parts: 3.2mm thick FRP lower deck. 2mm thick FRP upper deck. Stainless steel rear shaft. Wheel base parts. H Parts (Rear wing). J Parts (Front wing). IMPORTANT: This kit does not include a speed controller. You require an electronic speed controller to run this car - we include one in our deal below... More speed controllers can be found on our Speed Controllers page.
	Tamiya 58447 DEAL	Tamiya 58447 Ferrari F60 F1 F104 kit, Acoms Radio, TEU101BK ESC, Overnight Charger, 7.2v Sport Battery	£238 In Stock
	Tamiya 58447 KIT	Tamiya 58447 Ferrari F60 F1 F104 kit only - supply your own radio, ESC, receiver, servo, battery and charger	£173 In Stock
Deal Options Below...
Order: PJ6DP £5	Upgrade to an PJ6DP Charger? Charges in 2 hours instead of Overnight
Order: Go Large +£30	Go Large? Upgrade a DEAL to a "Go Large" Deal for just £30 more and get a 3 Amp Peak Charger (Mains & Cigar), 3000 Mah Battery (Long Run Time), FREE Paint (1 colour) and 8 AA Batteries FREE too! (Battery and Charger replace standard items)
Low UK delivery prices - Select No Rush for Economy Delivery, or Standard for Express Delivery!

Tamiya 58451 BMW M3 E30 Sport Evo

Chassis: Revised TT01ED, 4WD Shaft Drive

Click picture for larger view.

The classic BMW E30 M3 Sport Evo comes loaded on the TT-01D drift spec Type E-chassis. The BMW E30 M3 was built on the same platform as the E30. The modifications to the M3 are a widened front suspension and improved drive train from the E30 325i, which was also used in the BMW Z1 roadster. The E30 M3 was produced from 1986 to 1992, but still remains popular among BMW enthusiasts today.

Specs & Features

Based on the lightweight and user-friendly TT-01D Type-E chassis.

4WD shaft driven bathtub chassis with coil spring damped, 4-wheel independent double wishbone suspension and sealed front and rear differential gearboxes.

Drift-spec modifications include special suspension tuning, RS-540 sport-tuned motor, aluminum heat sink, CVA mini shock dampers and soft springs and adjustable upper arms.

Includes BBS silver wheels with Super Driftech tires which are made from a resin and rubber compound specially designed for long-lasting drift action. (24mm width)

Includes two 5mm diameter white LEDs to depict realistic headlights.

Includes TEU-104BK ESC.

2-channel R/C system, battery pack and charger separately required.

Wide variety of Option Parts are separately available to further customize your chassis:

	Item 53937 Tamiya LED Light Control Unit (TLU-02)
	Item 51000 Hi-Torque Servo Saver (Black)
	Item 54026 TT-01 Alu. Prop. Joint & Shaft
	Item 54059 TT-01 Type-E Carbon Damper Stay (Front)
	Item 54060 TT-01 Type-E Carbon Damper Stay (Rear)

Tamiya
58451
DEAL

Tamiya 58451 BMW M3 E30 Sport Evo TT01ED kit, Acoms Radio, Overnight Charger, 7.2v Sport Battery

£225
In Stock

Tamiya
58451
KIT

Tamiya 58451 BMW M3 E30 Sport Evo TT01ED kit only - supply your own radio, receiver, servo, battery and charger

£175
In Stock

Deal Options Below...

If you require a kit without a speed controller, please quote "RAW KIT - LESS £15"

Order: PJ6DP £5

Upgrade to an PJ6DP Charger? Charges in 2 hours instead of Overnight

Order: Go Large +£30

Low UK delivery prices - Select No Rush for Economy Delivery, or Standard for Express Delivery!

Tamiya 58455 Nissan GT-R Drift Spec TT01ED

Chassis: Revised TT01ED, 4WD Shaft Drive

Click picture for larger view.

The GT-R is now available on the excellent drift spec TT-01D Type-E chassis and is the perfect way to enter the world of R/C drifting.

Specs & Features

Based on the lightweight and user-friendly TT-01D Type-E chassis.

4WD bathtub chassis with coil spring damped, 4-wheel independent double wishbone suspension anshaft driven d sealed front and rear differential gearboxes.

Drift-spec modifications include tuned suspension, RS-540 sport-tuned motor, aluminum heat sink, CVA mini shock dampers and soft springs and adjustable upper arms.

Super Driftech tires which are made from a resin and rubber compound specially designed for long-lasting drift action. (26mm width)

LED Light Unit TLU-01 (Item 53909) and 2 white and 2 red 5mm LED lights are included.

2-channel R/C system, battery pack and charger separately required.

Wide variety of Option Parts are separately available to further customize your chassis:

	Item 53937 Tamiya LED Light Control Unit (TLU-02)
	Item 51000 Hi-Torque Servo Saver (Black)
	Item 54026 TT-01 Alu. Prop. Joint & Shaft
	Item 54059 TT-01 Type-E Carbon Damper Stay (Front)
	Item 54060 TT-01 Type-E Carbon Damper Stay (Rear)

Tamiya
58455
DEAL

Tamiya 58455 Nissan GT-R Drift Spec TT01ED kit, Acoms Radio, Overnight Charger, 7.2v Sport Battery

£228
In Stock

Tamiya
58455
KIT

Tamiya 58455 Nissan GT-R Drift Spec TT01ED kit only - supply your own radio, receiver, servo, battery and charger

£178
In Stock

Deal Options Below...

If you require a kit without a speed controller, please quote "RAW KIT - LESS £15"

Order: PJ6DP £5

Upgrade to an PJ6DP Charger? Charges in 2 hours instead of Overnight

Order: Go Large +£30

Low UK delivery prices - Select No Rush for Economy Delivery, or Standard for Express Delivery!

Tamiya TB03 Chassis Kits	Chassis: Race Bred, Tuneable TB03, Shaft Drive 4WD
58425 ORC Amemiya SGC-7 58434 Calsonic Imoul GT-R Click picture for larger views.	ORC Amemiya - The Japan Super GT Series GT500 Class has entrants from manufacturering teams while the GT300 Class has over 20 privateer team entries. This is a 1/10 scale R/C assembly kit of the ORC Amemiya SGC-7 which raced in the 2008 Super GT Series as the only rotary engine powered machine. The SGC-7 used the Mazda RX-7 as its base to become a fully fledged race-spec machine. The polycarbonate body realistically captures the sleek form of this machine and is mounted on the excellent longitudinally placed motor shaft-driven 4WD TB-03 chassis. This machine will surely bring excitement to R/C races just like at the Super GT. Calsonic Imoul GT-R - A worthy challenger to the above two on the Super GT track - particularly good down force has been reported with this body. About the Model The new TB-03 chassis is totally improved upon its predecessor the TB-02. Bathtub frame comes with a motor cooling duct to improve heat dissipation for better performance. In-board Front Suspension system features horizontally-mounted front dampers to enable a low-nose profile to mount the new-mould aerodynamic polycarbonate body shell. The body shell is also compatible with TA05-IFS chassis Newly-designed one-piece aluminium motor mount makes changing and adjusting gears a breeze. Equipped with front and rear ball differentials for greater power transmission efficiency. Race-proven reversible short suspension and TRF416 front and rear knuckles. Includes body, wheels, tyres, and Type 540 motor. ESC, 2-channel R/C system, 7.2V battery and charger separately required. IMPORTANT: This kit does not include a speed controller. You require an electronic speed controller to run this car - we include one in our deal below... More speed controllers can be found on our Speed Controllers page.
	Tamiya 58425 DEAL	Tamiya 58425 ORC Amemiya TB03 kit, Acoms Radio, TEU101BK ESC, Overnight Charger, 7.2v Sport Battery	£240 In Stock
	Tamiya 58425 KIT	Tamiya 58425 ORC Amemiya TB03 kit only - supply your own radio, ESC, receiver, servo, battery and charger	£175 In Stock
	Tamiya 58434 DEAL	Tamiya 58434 Calsonic Imoul GT-R TB03 kit, Acoms Radio, TEU101BK ESC, Overnight Charger, 7.2v Sport Battery	£244 In Stock
	Tamiya 58434 KIT	Tamiya 58434 Calsonic Imoul GT-R TB03 kit only - supply your own radio, ESC, receiver, servo, battery and charger	£179 In Stock
Deal Options Below...
Order: PJ6DP £5	Upgrade to an PJ6DP Charger? Charges in 2 hours instead of Overnight
Order: Go Large +£30	Go Large? Upgrade a DEAL to a "Go Large" Deal for just £30 more and get a 3 Amp Peak Charger (Mains & Cigar), 3000 Mah Battery (Long Run Time), FREE Paint (1 colour) and 8 AA Batteries FREE too! (Battery and Charger replace standard items)
Low UK delivery prices - Select No Rush for Economy Delivery, or Standard for Express Delivery!

Tamiya TA05-IFS Models	Chassis: Race Bred, Tuneable TA05 IFS, Belt Drive 4WD
58389 Ebbro Click picture for larger views.	58389 Ebbro Sleek GT300 Class Racing Machine: Team Nova entered their EBBRO 350R GT300 class race car, piloted by the duo of Tetsuya Tanaka and Shinsuke Yamazaki, for the 2007 Super GT season. Based on the Vemac 350R produced by R&D Sports, the car is equipped with a mid-mounted 3900cc V8 engine delivering over 400hp. With its wide and low silhouette, one may be led to believe that this car is an exotic Group C prototype racer rather than a GT300 machine. Tamiya now brings you the EBBRO 350R as an assembly kit R/C model, complete with accurately reproduced polycarbonate body shell and separately-molded rear wing. The new chassis features belt-driven 4WD for high-performance racing, but the most innovative feature of its new TA05-IFS chassis is the inboard front suspension setup with horizontally-mounted dampers. Of course, both the front and rear reversible suspensions can be adjusted according to driver preferences, and coupled with the well-balanced chassis layout, one-piece motor mount, and ball differentials, this machine is hard to beat Inboard Front Suspension IFS Design in close up: Inboard Front Suspension features a push rod/rocker arm setup with horizontally-mounted dampers. Specifications Length: 442mm, Width: 192mm, Height: 112mm Wheelbase: 257mm Tread: 167mm Motor: Type RS540 Drivetrain: Transverse motor with extra-long 2-belt 4WD Differential Gear: Front/Rear Ball Differentials Steering Tie-rod: 3-piece Suspension: Front/Rear Double Wishbone Dampers: Front/Rear Mini CVA Oil Dampers Gear Ratio: 7.159 :1 Tire Width/Diameter: 24mm/64mm (same for front & rear) IMPORTANT: This kit does not include a speed controller. You require an electronic speed controller to run this car - we include one in our deal below... More speed controllers can be found on our Speed Controllers page.
	Tamiya 58389 DEAL	Tamiya 58389 Ebbro TA05IFS kit, Acoms Radio, TEU101BK ESC, Overnight Charger, 7.2v Sport Battery	£243 In Stock
	Tamiya 58389 KIT	Tamiya 58389 Ebbro TA05IFS kit only - supply your own radio, ESC, receiver, servo, battery and charger	£178 In Stock
Deal Options Below...	If you are just buying the kit, get a Tamiya TEU101BK ESC for only £15 extra!
Order: PJ6DP £5	Upgrade to an PJ6DP Charger? Charges in 2 hours instead of Overnight
Order: Extra Sport £7.00	Extra Sport battery? Only £7.00 if ordered with a deal
Order: Go Large +£30	Go Large? Upgrade a DEAL to a "Go Large" Deal for just £30 more and get a 3 Amp Peak Charger (Mains & Cigar), 3000 Mah Nimh Battery (Long Run Time), FREE Paint (1 colour) and 8 AA Batteries FREE too! (Battery and Charger replace standard items) (Extra 3000 battery just £15 - Order Extra 3000 £15)
Low UK delivery prices - Select No Rush for Economy Delivery, or Standard for Express Delivery!

Tamiya DF03 Rally Ace Models

Chassis: Revised DF03 Buggy Chassis!

58417 Impreza 2006

58446 Lancia Delta

58440 Lancer EVO X

58461 Lancer EVO V

58430 Impreza 2008

58459 Datsun 240Z

Click picture for larger view.

A variant of the DF03 off road chassis, narrowed down to take a road body. This is technically an off-road car since the ground clearance is significantly better than a standard road car - it could run with ease on mown grass for example - but isn't an out and out off roader when compared to some of the other models on this page.

	Shaft driven 4WD chassis features a new suspension system with plenty of suspension stroke to allow dynamic driving on both on-road and off-road surfaces.
	Rally block tires.
	Comes with DF-03 drive train, which includes front and rear ball differentials and full ball bearings.
	CVA Damper Super Mini for front and rear suspensions.
	2 types of rear suspension arms allow wheelbase adjustment, enabling fitting of short wheelbase (251mm) bodies as well.
	Upper arms feature threaded shafts enabling camber angle adjustments.
	Electronic speed controller (TEU-101BK) included.
	Type 540 motor included.
	Choice of 3-gear ratios: 8.22:1, 7.90:1, 7.16:1
	Includes two spur gears (78T, 75T) and two pinion gears (29T, 32T)

Can be used with the following Option Parts:

53571 TRF Damper Set (Fluorine Coated)
53949 DF-03 Lightweight Battery Stopper Pin
53941 DF-03 Alu. Turnbuckle Steering Rod
53924 DF-03 Heat Sink Bar Set
53953 DF-03 Front One-Way Set
53931 DF-03 Center One-Way Set
53948 DF-03 Alu. One-Piece Propeller Cup Joint
53792 Assembly Universal Shaft (TT-01, TA04)
53925 DF-03 Slipper Clutch Set (Includes a 85T spur gear that can not be used.)

Tamiya
58417
DEAL

Tamiya 58417 Subaru Impreza 2006 DF03RA kit, Acoms Radio, Overnight Charger, 7.2v Sport Battery

£225
In Stock

Tamiya
58417
KIT

Tamiya 58417 Subaru Impreza 2006 DF03RA kit only - supply your own radio, receiver, servo, battery and charger

£175
In Stock

Tamiya
58446
DEAL

Tamiya 58446 Lancia Delta DF03RA kit, Acoms Radio, Overnight Charger, 7.2v Sport Battery

£265
In Stock

Tamiya
58446
KIT

Tamiya 58446 Lancia Delta DF03RA kit only - supply your own radio, receiver, servo, battery and charger

£215
In Stock

Tamiya
58430
DEAL

Tamiya 58430 Subaru Impreza 2008 DF03RA kit, Acoms Radio, Overnight Charger, 7.2v Sport Battery

£242
In Stock

Tamiya
58430
Kit

Tamiya 58430 Subaru Impreza 2008 DF03RA kit only - supply your own radio, receiver, servo, battery and charger

£192
In Stock

Tamiya
58440
DEAL

Tamiya 58440 Mistubishi Lancer EVO X DF03RA kit, Acoms Radio, Overnight Charger, 7.2v Sport Battery

£242
In Stock

Tamiya
58440
Kit

Tamiya 58440 Mistubishi Lancer EVO X DF03RA kit only - supply your own radio, receiver, servo, battery and charger

£192
In Stock

Tamiya
58461
DEAL

Tamiya 58461 Mistubishi Lancer EVO V DF03RA kit, Acoms Radio, Overnight Charger, 7.2v Sport Battery

£242
In Stock

Tamiya
58461
Kit

Tamiya 58461 Mistubishi Lancer EVO V DF03RA kit only - supply your own radio, receiver, servo, battery and charger

£192
In Stock

Tamiya
58459
DEAL

Tamiya 58459 Datsun 240Z DF03RA kit, Acoms Radio, Overnight Charger, 7.2v Sport Battery

£242
In Stock

Tamiya
58459
KIT

Tamiya 58459 Datsun 240Z DF03RA kit only - supply your own radio, receiver, servo, battery and charger

£192
In Stock

Deal Options Below...

If you require a kit without a speed controller, please quote "RAW KIT - LESS £15"

Order: PJ6DP £5

Upgrade to an PJ6DP Charger? Charges in 2 hours instead of Overnight

Order: Extra Sport £7.00

Extra Sport battery? Only £7.00 if ordered with a deal

Order: Go Large +£30

Low UK delivery prices - Select No Rush for Economy Delivery, or Standard for Express Delivery!

Tamiya 58435 Cusco Dunlop Impreza TA05 MK2	Chassis: Race Bred, Tuneable TA05 MK2, Belt Drive 4WD
Click picture for larger views.	The One & Only AWD Machine This is a ready to assemble electric powered R/C model of the Cusco Dunlop Subaru Impreza, which was the only AWD GT300 entrant during the 2008 Super GT season, and the winner of Round 4 Sepang. The impressive 4-door sedan body is recreated in durable polycarbonate, with small side mirrors, large rear wing, and front canards all separately molded for enhanced detail. This model features the evolved version of the proven belt-driven 4WD TA05 chassis, the TA05 ver.II. Further Evolved Race-Spec Chassis, TA05 ver.II The chassis width has been reduced for greater ground clearance when the chassis rolls. Thanks to the position of the integrated motor mount, the position of the battery pack has been moved forward, resulting in optimum balance and enhanced handling. The drivetrain features front and rear 37T ball differentials and an 18T centre pulley. The four wheel double wishbone suspension system features an inboard front suspension layout with short reversible suspension arms and uprights which have 1050 ball bearings. In addition, the separate suspension mounts help to achieve easier maintenance and setting changes. Maintenance is made easier thanks to the front and rear separate suspension mounts. Newly designed aluminium die-cast motor mount and chassis enable narrower width. The chassis is designed as narrow as possible and is equipped with the TRF416's urethane bumper. Specifications 　●Length: 451mm, Width: 191mm, Height: 128mm 　●Wheelbase: 257mm　　●Tread (Front and Rear): 165mm 　●RS540 Motor included 　●Horizontally placed motor equal length 2-belt driven 4WD 　●Front and Rear Ball Differential 　●3-piece steering tie-rod 　●Front and Rear Double Wishbone Suspension 　●Front and Rear CVA Oil Damper Super Mini 　●Gear Ratio=7.19 :1 　●Tyre Width/Diameter (Front and Rear): 24mm/64mm IMPORTANT: This kit does not include a speed controller. You require an electronic speed controller to run this car - we include one in our deal below... More speed controllers can be found on our Speed Controllers page.
	Tamiya 58435 DEAL	Tamiya 58435 Cusco Dunlop Subaru TA05 Mk2 kit, Acoms Radio, TEU101BK ESC, Overnight Charger, 7.2v Sport Battery	£274 In Stock
	Tamiya 58435 KIT	Tamiya 58435 Cusco Dunlop Subaru TA05 Mk2 kit only - supply your own radio, ESC, receiver, servo, battery and charger	£209 In Stock
Deal Options Below...
Order: PJ6DP £5	Upgrade to an PJ6DP Charger? Charges in 2 hours instead of Overnight
Order: Go Large +£30	Go Large? Upgrade a DEAL to a "Go Large" Deal for just £30 more and get a 3 Amp Peak Charger (Mains & Cigar), 3000 Mah Battery (Long Run Time), FREE Paint (1 colour) and 8 AA Batteries FREE too! (Battery and Charger replace standard items)
Low UK delivery prices - Select No Rush for Economy Delivery, or Standard for Express Delivery!

Tamiya 58448 Corolla Axio Apr GT TA05 MK2	Chassis: Race Bred, Tuneable TA05 MK2, Belt Drive 4WD
Click picture for larger views.	The Corolla Axio apr GT was revealed on January 9, 2009 at the Tokyo Auto Salon. The vehicle is Super GT's new GT300 class vehicle. In the 2008 season, apr competed in the GT300 class with the Toyota MR-S and MR2. The team won the driver's title three times in the past and achieved first place with the MR-S last season. The Corolla's improved aerodynamics has helped the team receive better results. Further Evolved Race-Spec Chassis, TA05 ver.II The chassis width has been reduced for greater ground clearance when the chassis rolls. Thanks to the position of the integrated motor mount, the position of the battery pack has been moved forward, resulting in optimum balance and enhanced handling. The drive train features front and rear 37T ball differentials and an 18T centre pulley. The four wheel double wishbone suspension system features an inboard front suspension layout with short reversible suspension arms and uprights which have 1050 ball bearings. In addition, the separate suspension mounts help to achieve easier maintenance and setting changes. Maintenance is made easier thanks to the front and rear separate suspension mounts. Newly designed aluminium die-cast motor mount and chassis enable narrower width. The chassis is designed as narrow as possible and is equipped with the TRF416's urethane bumper. Specifications 　●Length: 451mm, Width: 191mm, Height: 128mm 　●Wheelbase: 257mm　　●Tread (Front and Rear): 165mm 　●RS540 Motor included 　●Horizontally placed motor equal length 2-belt driven 4WD 　●Front and Rear Ball Differential 　●3-piece steering tie-rod 　●Front and Rear Double Wishbone Suspension 　●Front and Rear CVA Oil Damper Super Mini 　●Gear Ratio=7.19 :1 　●Tyre Width/Diameter (Front and Rear): 24mm/64mm IMPORTANT: This kit does not include a speed controller. You require an electronic speed controller to run this car - we include one in our deal below... More speed controllers can be found on our Speed Controllers page.
	Tamiya 58448 DEAL	Tamiya 58448 Corolla Axio Apr GT TA05 Mk2 kit, Acoms Radio, TEU101BK ESC, Overnight Charger, 7.2v Sport Battery	£273 In Stock
	Tamiya 58448 KIT	Tamiya 58448 Corolla Axio Apr GT TA05 Mk2 kit only - supply your own radio, ESC, receiver, servo, battery and charger	£208 In Stock
Deal Options Below...
Order: PJ6DP £5	Upgrade to an PJ6DP Charger? Charges in 2 hours instead of Overnight
Order: Go Large +£30	Go Large? Upgrade a DEAL to a "Go Large" Deal for just £30 more and get a 3 Amp Peak Charger (Mains & Cigar), 3000 Mah Battery (Long Run Time), FREE Paint (1 colour) and 8 AA Batteries FREE too! (Battery and Charger replace standard items)
Low UK delivery prices - Select No Rush for Economy Delivery, or Standard for Express Delivery!

Tamiya 58456 Gallardo Supertrofeo TA05 MK2

Chassis: Race Bred, Tuneable TA05 MK2, Belt Drive 4WD

Click picture for larger views.

The Super Trofeo is a limited edition version of the Gallardo LP 560-4 sports car. It was designed for the Lamborghini Blancpain Super Trofeo one-make racing series, which was held in May 2009. The car features the same chassis as the LP 560-4, but includes modifications such as a direct injection V10 engine which pumps out 570ps. It also has a higher compression ratio of 12.5:1 variable valve timing. The standard, E-gear transmission allows the driver to shift gears much faster than a manual gearbox. The Gallardo features a 4WD suspension for enhanced handling and a dry weight of 2,900lbs.

Specs & Features

1/10 R/C assembly model kit.

Newly designed polycarbonate body accurately reproduces the ground-hugging form of the Gallardo.

Separately molded side mirrors and rear wing are accurately reproduced.

2-belt driven TA05 ver.II chassis offers superior control, handling, and easier maintenance.

Comes with medium narrow racing slick tires and 16-spoke gun metal wheels.

Type 540 motor included.

2-channel R/C system, ESC, battery pack & charger are separately required.

A wide variety of Option Parts is available to further customize your chassis:

	Item 54170 TA05 ver.II Low Friction Drive Belt (342mm)
	Item 54019 TA05-IFS Aluminum Bulkhead
	Item 54175 TA05 ver.II Separate Suspension Mounts (1D-1XD)
	Item 54196 TA05 ver.II Carbon Reinforced K Parts (Stiffener) Item 54197 TA05 ver.II Aluminum Motor Mount Set

IMPORTANT: This kit does not include a speed controller. You require an electronic speed controller to run this car - we include one in our deal below... More speed controllers can be found on our Speed Controllers page.

Tamiya
58456
DEAL

Tamiya 58456 Gallardo Supertrofeo TA05 Mk2 kit, Acoms Radio, TEU101BK ESC, Overnight Charger, 7.2v Sport Battery

£274
In Stock

Tamiya
58456
KIT

Tamiya 58456 Gallardo Supertrofeo TA05 Mk2 kit only - supply your own radio, ESC, receiver, servo, battery and charger

£209
In Stock

Deal Options Below...

Order: PJ6DP £5

Upgrade to an PJ6DP Charger? Charges in 2 hours instead of Overnight

Order: Go Large +£30

Low UK delivery prices - Select No Rush for Economy Delivery, or Standard for Express Delivery!

Tamiya Racing Chassis Kits

Current stock - click for more info:

Tamiya 49348 TB-02R Chassis Kit £175

Tamiya 58450 TT-01R Type E Chassis Kit £132

Tamiya 58420 TB03D Drift Chassis £149

Tamiya 84023 M03R Blue Plated Chassis Kit £135

Tamiya 58443 M05 Pro Chassis Kit £144

Tamiya 84106 F104 PRO with Light Weight Body £239

Tamiya 58431 F104 Pro Formula One Car Race Model £225

Tamiya 84109 TB03R Racing Chassis Kit £235

Tamiya 42167 TRF201 Chassis Buggy Kit £249

Deal Options - Pick & Mix!
Add these to the deal prices above as you require.

Charger Alternatives
	Order Code - PJ6DP+£5	Replace the standard overnight charger in a deal with a 2 hour basic peak charger - just add £5
	Order Code - ACS67P+£20.	A highly advanced new technology charger with a powerful and very, very fast 3Amp charge rate. Basically, this is the pinnacle of charger technology, as it takes power input from either mains or cigar and uses a microprocessor to monitor battery voltage to ensure that whether you charge a 1400 Nicad to a 3500 Nimh pack, it'll always be 100% charged. Add £20 to deal in place of overnight charger. As included in our "Go Large" Superdeal!
Radio Alternatives
	Order Code - 40Mhz+£50.	Acoms 40Mhz radio in place of 27Mhz version, at no cost. 40Mhz radio may offer range or interference benefits in some situations, and is less common so useful if you're running in a public place such as a park. NB This is a stick radio, as pictured. It looks exactly the same as the regular radio, it's just on a different band!

Tamiya 58211 Mini Cooper	Chassis: M03 - 2WD, Front Drive
Click picture for larger view.	Includes powerful 540 series motor, overall length 31cm, width 16cm. Low Ground clearance - on road racer. Clear plastic body. Classic. Needs no more introduction, other than to say that like the real thing, Tamiya's Mini is Front Wheel Drive. (It's suspension is softer too!). This model of the Mini Cooper replicates a rally cross vehicle as used in the early 1990s. It features extended wheel arches and is dechromed (i.e. no bumpers are molded to the body shell, although of course an internal bumper protects the chassis as on all Tamiya cars). Very much a pocket rocket - we have know this Mini and the BMW Mini to out perform some of the 4WD cars in a straight line! An optional Mr Bear ballrace set is available for this car - click here for details
	Tamiya 58211 DEAL	Tamiya 58211 Mini kit, Acoms Radio, Overnight Charger, 7.2v Sport Battery	£149 In Stock
	Tamiya 58211 KIT	Tamiya 58211 Mini kit only - supply your own radio, receiver, servo, battery and charger	£99 In Stock
Deal Options Below...	If you require a kit without a speed controller, please quote "RAW KIT - LESS £15"
Order: PJ6DP £5	Upgrade to an PJ6DP Charger? Charges in 2 hours instead of Overnight
Order: Go Large +£30	Go Large? Upgrade a DEAL to a "Go Large" Deal for just £30 more and get a 3 Amp Peak Charger (Mains & Cigar), 3000 Mah Battery (Long Run Time), FREE Paint (1 colour) and 8 AA Batteries FREE too! (Battery and Charger replace standard items)
Low UK delivery prices - Select No Rush for Economy Delivery, or Standard for Express Delivery!

Tamiya Help and Advice
Tamiya Radio Control are high performance kit cars - you must assemble all parts yourself. If you do not feel capable of assembling these kits, take a look at Tamiya's own Ready to Run QD & XB cars.

Tamiya On-Road RC Car Kits & Deals 2010
Quicklinks: RC Index On Road Off Road Ready Builts Tanks
Trucks Yachts Pre-Orders Tamiya Parts

Deal Options - Pick & Mix!
Add these to the deal prices above as you require.

Tamiya On-Road RC Car Kits & Deals 2010 Quicklinks: RC Index On Road Off Road Ready Builts Tanks Trucks Yachts Pre-Orders Tamiya Parts

Tamiya Help and Advice Tamiya Radio Control are high performance kit cars - you must assemble all parts yourself. If you do not feel capable of assembling these kits, take a look at Tamiya's own Ready to Run QD & XB cars.

Deal Options - Pick & Mix! Add these to the deal prices above as you require.

Tamiya On-Road RC Car Kits & Deals 2010
Quicklinks: RC Index On Road Off Road Ready Builts Tanks
Trucks Yachts Pre-Orders Tamiya Parts

Tamiya Help and Advice
Tamiya Radio Control are high performance kit cars - you must assemble all parts yourself. If you do not feel capable of assembling these kits, take a look at Tamiya's own Ready to Run QD & XB cars.

Deal Options - Pick & Mix!
Add these to the deal prices above as you require.